top of page

Please note the Log In/Sign Up below is to subscribe to our blog. If you wish to create a shop account please head over to the Shop.

Search

Falcons Are Now Available In The Shop



Falcons are now available on a regular basis. Please make sure to read the following information to ensure you are ready to make your purchases.


Falcon Shipping Time Frame

While our Falcons are already assembled, the trim color you have selected will be printed upon the creation of your order. After printing, the small trim parts will need to be assembled before your Falcon is ready to be shipped out.


If there are additional items that need to be printed and assembled, this will tack on additional time before your order can be shipped.

Check the Shop


This is where you will find the listing for the Falcon, along with all your extras.


About the Falcon

Made from carbon fiber and 3D printed, ABS plastic, the Falcon is a light, Scotch-tensioned electric spinning wheel that is optimized for spinning the finest weights at the absolute highest speeds of any e-spinner on the market — by a wide margin. The Falcon is capable of spinning at 4200 RPM, yet it’s just as comfortable jogging along at 500 RPM.

​

This is a specialty e-spinner created specifically for those who spin thread and cobweb singles on the regular and are looking to do so with the option of production-level speeds. While we love to see our e-spinners out in the world, this is not an entry-point wheel, nor is it the right wheel for everyone. If you’ve maxed out the speed options on your Sparrow or Starling and find yourself waiting for twist to build into your singles while spinning at 100%, this could be the e-spinner for you.

 

Be aware that unlike our other Daedalus models, the Falcon is Scotch-tension driven only, offering the lightest of takeup combined with speeds previously unseen on the electric spinning wheel market. While the unit spins equally well at its lowest speed, it was designed for a specific market of highly experienced users whose requests for this e-spinner piqued

our engineering minds into action

Cost Breakdown


Falcon (without the speed controller) - $900

Speed Controller (required to operate) - $140


Add-ons

  • Extra Bobbin 3 pack (black only) - $90

  • Motor Extension Cable 3 FT or 6 FT - $23-25


What's Included with your Falcon Purchase

  • *Falcon

  • 3 black bobbins with aluminum brake drums

  • Orifice hook

  • Spares Kit  (3mm allen wrench, 2 axle o-ring, 2 chassis bolts, 2 square nuts, 2 rear bearing, 2 rubber feet, 2 rubber grommets, 2 drive belt, 2 cinches, 3 elastics, 1mm Kevlar tension cord, 1 small super glue, and 2 tension springs)  

  • 15V 5amp DC Power Supply

  • Manual

​

*Speed Controller is required to operate your Falcon, but must be purchased separately if you do not already have one for a Daedalus e-spinner.



Also, don't forget that if you would like to purchase a Starling or Martin, we have a queue for these wheels. Simply go to their page and fill out the queue form to be on the waiting list.


Happy Spinning, Weaving, and Winding!



Evanita




Comments

bottom of page