top of page
Daedalus2022Logo.png

Please note the Log In/Sign Up below is to subscribe to our blog. If you wish to create a shop account please head over to the Shop.

Falcons Soaring in November


Falcon with Easy to Spin Acala Cotton from Apothefaery

We are preparing the incubators for a new flock of Falcons with an anticipated flight schedule of November. We have sent out Build emails for the next batch of Falcons from our queue. Emails are sent from Support@daedalusspinningwheels.com.


We highly recommend adding this email address to your contacts to help ensure the email doesn't land in spam. If your name is in the list below and you do not see the email please check your spam. L. Rehbein

K. Taylor

K. Ritchie

R. Brazell

S. J. Strong

S. Pirkle

About the Falcon

Made from carbon fiber and 3D printed, ABS plastic, the Falcon is a light, Scotch-tensioned electric spinning wheel that is optimized for spinning the finest weights at the absolute highest speeds of any e-spinner on the market — by a wide margin. The Falcon is capable of spinning at 4200 RPM, yet it’s just as comfortable jogging along at 500 RPM.

This is a specialty e-spinner created specifically for those who spin thread and cobweb singles on the regular and are looking to do so with the option of production-level speeds. While we love to see our e-spinners out in the world, this is not an entry-point wheel, nor is it the right wheel for everyone. If you’ve maxed out the speed options on your Sparrow or Starling and find yourself waiting for twist to build into your singles while spinning at 100%, this could be the e-spinner for you.

 

Be aware that unlike our other Daedalus models, the Falcon is Scotch-tension driven only, offering the lightest of takeup combined with speeds previously unseen on the electric spinning wheel market. While the unit spins equally well at its lowest speed, it was designed for a specific market of highly experienced users whose requests for this e-spinner piqued our engineering minds into action


Cost Breakdown


Falcon (without the speed controller) - $900

Speed Controller (required to operate) - $125


Add-ons

  • Extra Bobbin 3 pack (black only) - $90

  • Motor Extension Cable 3 FT or 6 FT - $23-25


What's Included with your Falcon Purchase

  • *Falcon

  • 3 black bobbins with aluminum brake drums

  • Orifice hook

  • Spares Kit  (3mm allen wrench, 1 axle o-ring, 2 chassis bolts, 2 cinches, 1 drive belt, 3 elastics, 1mm Kevlar tension cord,1 rear bearing, 2 rubber feet, 2 rubber grommets, 2 square nuts, 1 small super glue, and 2 tension springs)  

  • 15V DC Power Supply

  • Manual

*Speed Controller is required to operate your Falcon but must be purchased separately if you do not already have one for a Daedalus e-spinner. Speed Controllers are $125.


Starling V3FP
Falcon
Three Black Helios Bobbins
Three Falcon Bobbins

Happy Spinning!

Evanita

140 views0 comments

Recent Posts

See All

Comments


bottom of page